Sarah considered calling a pro—$400 minimum. Instead, she decided to try fixing it herself. Here’s what she learned through trial, error, and a few choice words.
Sarah’s first instinct was to run to the hardware store. Smartly, she stopped. She measured the entire window frame and took a photo of the manufacturer’s sticker on the spacer bar between the panes. She learned that for sealed double pane units, you don’t buy “glass.” You buy a sealed Insulated Glass Unit (IGU) —two panes fused together with a spacer. Her local glass shop cut custom IGUs for $85. how to replace a double pane window glass
She ran a thin bead of siliconized glazing compound (not regular caulk) around the frame where the glass would sit. She set the IGU in place, pressed gently, and then snapped the labeled glazing beads back into their tracks. For the first time, the crack was gone. She wiped away the tiny bit of squeezed-out sealant with mineral spirits. Sarah considered calling a pro—$400 minimum
Back home, she examined the window. On the interior side, she found thin vinyl or aluminum strips holding the glass in place—the glazing beads. She slid a stiff putty knife into the seam and gently pried. Snap! The first bead broke. She learned the hard way: start at the middle of the longest side, not the corner. The second bead came off cleanly. She labeled each piece (Top, Bottom, Left, Right) with masking tape. Sarah’s first instinct was to run to the hardware store
Total cost: $112 ($85 for the IGU, $27 for tools/sealant she didn’t already own). Time: 3 hours spread over two days (one to remove, one to install). A professional would have charged $450.